GD25LQ64CSIGR GIGADEVICE SOP-8

Features

FEATURES

·64M-bit Serial Flash
  -8192K-byte
  -256 bytes per programmable page Standard,Dual,Quad SPI,QPI
·Standard SPl:SCLK,CS#,SI,SO,WP#,HOLD#
  -Dual SPl:SCLK,CS#,IO0,I01,WP#,HOLD#
  -Quad SPl:SCLK,CS#,IO0,I01,I02,I03
  -QPI:SCLK,CS#,IO0,I01,I02,IO3
·High Speed Clock Frequency
  -120MHz for fast read with 30PF load
  -Dual lI/O Data transfer up to 240Mbits/s
  -Quad I/O Data transfer up to 480Mbits/s-QPI Mode Data transfer up to 480Mbits/s
·Software/Hardware Write Protection
  -Write protect al/portion of memory via software
  -Enable/Disable protection with WP# Pin
  -Top/Botom Block protection
·Minimum 100,000 Program/Erase Cycles
·Data Retention
  -20-year data retention typical
·Fast Program/Erase Speed
  -Page Program time:0.7ms typical
  -Sector Erase time:90ms typical
  -Block Erase time:0.3/0.45s typical
  -Chip Erase time:30s typical
·Flexible Architecture
  -Uniform Sector of 4K-byte
  -Uniform Block of 32/64K-byte-Erase/Program Suspend/Resume
·Low Power Consumption
  -35uA typical stand-by current
  -1uA typical power down current
· Advanced security Features
  -128-Bit Unique ID for each device
  -3×1024-Byte Security Registers With OTP Lock
· Single Power Supply Voltage
  -Full voltage range:1.65～2.0V Allows XIP(execute in place) Operation
  -Continuous Read With 8/16/32/64-byte Wrap

GENERAL DESCRIPTION

The GD25LQ64C (64M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI and QPI mode: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). 
The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 
480Mbits/s.